[DLC] Дополнение – JustTrains - Tohoku High Speed Rail & Main Line [Train Simulator 2022/Railworks / 2020/2022] [ENG] (1.01)

Особенности релиза

Japanese commuter and high speed rail comes to Train Simulator!
Tohoku High Speed Rail & Main Line includes two major routes: Tohoku Main Line from Kitakami to Morioka and Tohoku High-Speed Line from Sendai to Morioka, along with the High Speed E5 and E701 commuter trains. The routes feature custom stations and objects.
ROUTES
Tohoku Main Line (commuter)
The Tohoku Main Line links the eastern Japanese cities of Tokyo and Aomori on the main island, Honshu. The section of the route included here runs between Kitakami and Morioka; it is 48km in length and features twelve stations. The 701 Series commuter train is used on this route.
Tohoku High Speed line
The Tohoku High Speed line links the eastern Japanese cities of Tokyo and Aomori on the main island, Honshu. The section of the route included here runs between Sendai and Morioka; it is 175km in length and features eight stations. The E5 High speed train runs up to 320km/h.
TRAINS
701 SERIES EMU
The 701 Series is an AC EMU train operated on local services in the Northeast area of Japan. It features:
External models of the Tc and Mc model in Morioka depot livery
You can choose a pre-set consist up to 6 cars or create your own consists
Detailed cabin view
ATS-Ps safety system (Tohoku Main Line)
ATS or automatic train stop is an accident prevention system on the train that automatically stops it if certain situations. The ATS installed on most Japanese trains and routes (apart from High Speed Rail) are mostly transponder-based. In this software the ATS Ps and ATS S systems are supplied.
E5 SERIES HIGH SPEED EMU
The E5 Series EMU is a Japanese high speed train operated on Tohoku High Speed Rail since 5 March 2011, and Hokkaido High Speed Rail since 26 March 2016. It features:
Detailed external models
Detailed cabin views
DS-ATC safety system (Tohoku High Speed)
The DS-ATC is a digital ATC system which uses the track circuits to detect the presence of a train in the section and then transmits digital data from wayside equipment to the train on the track circuit numbers, the number of clear sections (track circuits) to the next train ahead, and the platform that the train will arrive at. The received data is compared with data about track circuit numbers saved in the train on-board memory and the distance to the next train ahead is computed. The on-board memory also saves data on track gradients, and speed limits over curves and points. All this data forms the basis for ATC decisions when controlling the service brakes and stopping the train.
In a digital ATC system, the running pattern creates determines the braking curve to stop the train before it enters the next track section ahead occupied by another train. An alarm sounds when the train approaches the braking pattern and the brakes are applied when the braking pattern is exceeded. The brakes are applied lightly first to ensure better ride comfort, and then more strongly until the optimum deceleration is attained. The brakes are applied more lightly when the train speed drops to a set speed below the speed limit. Regulating the braking force in this way permits the train to decelerate in accordance with the braking pattern, while ensuring ride comfort.
There is also an emergency braking pattern outside the normal braking pattern and the ATC system applies the emergency brakes if the train speed exceeds this emergency braking pattern.

Порядок установки

Откройте файл 7z и перетащите папки в папку Railworks