Установка
Установить "Maxon App".
Нажать на кнопку "Install".
Загрузится и установится Microsoft Edge Webview2 Runtime.
По окончании установки нажать на кнопку "Close".
Закрыть окно "Maxon App".
Производим регистрацию в "Maxon App", принимаем Лицензионное соглашение.
Нажимаем кнопку "Продолжить".
Нажимаем кнопку "Выйти и продолжить позже".
Закрыть приложение "Maxon App".
Обязательно отключить интернет.
Установите программу "Red Giant Universe 5.0.1.exe".
Нажимаем кнопку "Продолжить".
Для новых пресетов добавили устанавливаемые шрифты, оставляем галку перед пунктом: Open Source Fonts for Presets.
Нажать на кнопку "Install".
По окончании установки нажать на кнопку "Close".
Запускаем программу Adobe After Effects CC.
Создаём проект/композицию и к слою применяем любой эффект, например
Effects - Video Effects - RG Universe Text - uni.Hacker Text.
На видео в окне Композиция (Composition) видим красный крест.
В панели Effect Controls (Элементы управления эффектами) в закладке эффекта нажимаем на кнопку "Licensing".
Загрузится окно "Maxon App".
В правом верхем углу нажимаем на 3 горизонтальные линии.
Выбираем "Import serial numbers".
Если у вас стояла предыдущая версия набора плагинов Universe 3, то серийник автоматически подхватится (серийные номера остались прежними).
Об этом сообщает надпись "Legacy Serial License".
Если устанавливаете первый раз, то необходимо ввести серийный номер, и активировать Maxon Universe 5.0.
В окне "Red Giant - Serial registration" нажать на кнопку "Manually enter a serial number" (Ввести серийный номер вручную).
В окне "Legacy product registration" ввести серийный номер:
скрытый текст
TCBK2245868172939255
TCBK2245875777348331
TCBF2005891888369252
TCBF2005849176686825
TCBF2005902179164355Нажать на кнопку "Register product".
Появится окно с надписью об успешной регистрации "Your product was successfully registered".
Нажать на кнопку "Ok".
В окне "Maxon App" напротив активированного плагина появится зеленый кружок и возможность его обновлять.
Закрываем приложение "Maxon App".
На видео в окне Композиция (Composition) нет триального креста.
Чтобы не слетела активация при выходе в инет,
Необходимо заблокировать Программе выход в сеть
1 вариант:Использовать брандмауэр Windows для блокировки Приложения.
Добавить Программу в Windows Firewall / Firewall exceptions ("Firewall and Network Security" in Windows 10):
В Поиске вводим Windows firewall:
ИЛИ
пройти Пуск - Служебные Windows - Панель управления\Система и безопасность\Брандмауэр Защитника Windows
ИЛИ
В Панели задач - Защитник Windows (Defender Windows):
Безопасность Windows - Брандмауэр и безопасность сети
Дополнительные параметры -
- Inbound rules (Правила для входящих подключений) - New rule (Создать правило) - Program (Программа) -
- правой кнопкой мыши по ярлыку ACDSee на Рабочем столе - копируем путь в графе Target -
- C:\Program Files\ACD Systems\ACDSee Ultimate\15.0\ACDSeeUltimate2022.exe - вставляем в окно Program - Блокировать подключение.
- Outbound rules (Правило для исходящего подключения) - New rule (Создать правило) - Program (Программа) -
- правой кнопкой мыши по ярлыку ACDSee на Рабочем столе - копируем путь в графе Target -
- C:\Program Files\ACD Systems\ACDSee Ultimate\15.0\ACDSeeUltimate2022.exe - вставляем в окно Program - Блокировать подключение.
Аналогичные правила делаем для всех необходимых файлов.
2 вариант:Редактирование файла "hosts".
Вручную или с помощью keygen внести записи в файл "hosts".
Открываем
C:\Windows\System32\drivers\etc
Выбираете в Ленте - "Вид" - ставите галочки напротив "Расширения имен файлов" и "Скрытые элементы".
Необходимо прописать адреса серверов, на которые программа делает запрос.
Копируете файл "hosts" на Рабочий стол.
Правой кнопкой мыши по файлу "hosts" - "Открыть с помощью" - "Блокнот".
Добавляем в конец файла необходимые данные.
127.0.0.1 link.redgiant.com
127.0.0.1 52.73.146.57
127.0.0.1 52.70.159.81
или новый
127.0.0.1 52.45.108.54
127.0.0.1 34.253.115.112
127.0.0.1 52.6.87.59
127.0.0.1 108.128.39.69
127.0.0.1 63.35.33.186
Сохраняем.
Копируем и вставляем с заменой отредактированный файл "hosts" в
C:\Windows\System32\drivers\etc от Администратора.
ИЛИ
Открываем "Пуск" - "Стандартные Windows" - правой кнопкой мыши по "Блокнот" - "Дополнительно" - "Запуск от админа".
"Файл" - "Открыть"
Вставляем этот путь
C:\Windows\System32\drivers\etc
Вместо "Текстовые документы .txt" выбираем "Все файлы".
Выбираем и открываем файл "hosts".
Необходимо прописать адреса серверов, на которые программа делает запрос.
Добавляем в конец файла необходимые данные.
127.0.0.1 link.redgiant.com
127.0.0.1 52.73.146.57
127.0.0.1 52.70.159.81
или новый
127.0.0.1 52.45.108.54
127.0.0.1 34.253.115.112
127.0.0.1 52.6.87.59
127.0.0.1 108.128.39.69
127.0.0.1 63.35.33.186
Сохраняем.
Посмотреть IP адреса подключения Программы в интернете
Открываем - "Диспетчер задач" - выбираем вкладку "Производительность" - в самом низу "Мониторинг ресурсов"
Запускаем Программу.
Во вкладке "Обзор" - ЦП - отмечаем галочкой нужную Программу для фильтрации "Образ: имя исполняемого файла процесса".
Во вкладке "Сеть" открываем вкладки "Процессы с сетевой активностью", "Сетевая активность" и "TCP подключения".
В столбце «Удаленный адрес» и «Удаленный порт» смотрим и выписываем адреса, к которым обращается Программа в интернете.
===================================================
Installation:
Install "Maxon App".
Click on the "Install" button.
Microsoft Edge Webview2 Runtime will be downloaded and installed.
At the end of the installation, click on the "Close" button.
Close the "Maxon App" window.
We register in the "Maxon App", accept the License Agreement.
Click the "Continue" button.
Click the "Exit and continue later" button.
Close the "Maxon App" application.
Disable internet.
Run the "Red Giant Universe 5.0.1.exe" file.
Click on the "Continue" button.
For new presets, installable fonts have been added, we leave a check mark before the item: Open Source Fonts for Presets.
Click on the "Install" button.
At the end of the installation, click on the "Close" button.
Launch the Adobe After Effects CC.
Create a project/composition and apply any effect to the layer, for example
Effects - Video Effects - RG Universe Text - uni.Hacker Text.
In the video, we see a red cross in the Composition window.
In the Effect Controls panel in the effect tab, click on the "Licensing" button.
The "Maxon App" window will load.
In the upper right corner, click on the 3 horizontal lines.
Select "Import serial numbers".
If you had a previous version of the Universe 3 plugin set, then the serial number will be automatically picked up (the serial numbers remain the same).
This is reported by the inscription "Legacy Serial License".
If you install it for the first time, you need to enter the serial number and activate Maxon Universe 5.0.
In the "Red Giant - Serial registration" window, click on the "Manually enter a serial number" button.
In the "Legacy product registration" window, enter the serial number:
скрытый текст
RLPK2245831771673083
RLPK2245855360592319Click on the "Register product" button.
A window opens with the inscription about successful registration "Your product was successfully registered".
Click on the "Ok" button.
In the "Maxon App" window, a green circle will appear opposite the activated plugin and the ability to update it.
Closing the "Maxon App" application.
There is no trial cross in the video in the Composition window.
In order not to lose activation when logging in to the Internet,
Block the Application from accessing the network
Methode 1:Use a Windows Firewall to block the Application.
Add the Program files to the Windows Firewall / Firewall exceptions ("Firewall and Network Security" in Windows 10):
In the Search, enter Windows firewall:
OR
the path - Start - Service Windows - Control Panel\System and Security\Windows Defender Firewall
OR
In the Taskbar - Windows Defender:
Windows Security - Firewall and Network Security
Additional parameters -
- Inbound rules - New rule - Program - right-click on ACDSee Application on the Desktop -
- copy the path in the Target graph - C:\Program Files\ACD Systems\ACDSee Ultimate\15.0\ACDSeeUltimate2022.exe -
- insert the Program window
- Outbound rules - New rule - Program - right-click on Application shortcut on the Desktop -
- copy the path in the Target graph - C:\Program Files\ACD Systems\ACDSee Ultimate\15.0\ACDSeeUltimate2022.exe -
- insert the Program window
We make similar rules for all needed files.
Methode 2:Editing the "hosts" file.
Manually or using keygen to make entries in the "hosts" file.
Open
C:\Windows\System32\drivers\etc
Select in the "Feed" - "View" - check the boxes next to "File name extensions" and "Hidden elements".
It is necessary to register the addresses of the servers to which the Program makes a request.
Copy the "hosts" file to the Desktop.
Right-click on the file "hosts" - "Open with" - "Notepad".
Add the necessary data to the end of the file.
127.0.0.1 link.redgiant.com
127.0.0.1 52.73.146.57
127.0.0.1 52.70.159.81
or new
127.0.0.1 52.45.108.54
127.0.0.1 34.253.115.112
127.0.0.1 52.6.87.59
127.0.0.1 108.128.39.69
127.0.0.1 63.35.33.186
Save it.
Copy and paste with replacement the edited file "hosts" in
C:\Windows\System32\drivers\etc from the Administrator.
OR
Open "Start" - "Standard Windows" - right-click on "Notepad" - "Advanced" - "Run from admin".
"File" - "Open"
Insert this path
C:\Windows\System32\drivers\etc
Instead of "Text documents .txt" select "All files".
Select and open the file "hosts".
Add the necessary data to the end of the file.
127.0.0.1 link.redgiant.com
127.0.0.1 52.73.146.57
127.0.0.1 52.70.159.81
or new
127.0.0.1 52.45.108.54
127.0.0.1 34.253.115.112
127.0.0.1 52.6.87.59
127.0.0.1 108.128.39.69
127.0.0.1 63.35.33.186
Save it.
View the IP addresses of the Program connection on the Internet
Open - "Task Manager" - select the "Performance" tab - at the very bottom "Resource monitoring"
Run The Program.
In the "Overview" tab - CPU - click the desired Program for filtering "Image: the name of the executable file of the process".
In the "Network" tab, open the tabs "Processes with network activity", "Network activity" and "TCP connections".
In the "Remote address" and "Remote Port" column, look and write out the addresses that the Program accesses on the Internet.