Autodesk MotionBuilder 2012 x32 x64 ISO ( English )

Системные требования (пока только на английском языке)

Software
The 32-bit version of Autodesk® MotionBuilder® 2012 software is supported on the following operating system:
- Microsoft® Windows® XP Professional operating system (SP2 or higher)
The 64-bit version of MotionBuilder 2012 software is supported on any of the following operating systems:
- Microsoft Windows XP Professional x64 Edition (SP2 or higher)
- Microsoft® Windows Vista® Business x64 Edition operating system (SP1 or higher)
- Microsoft Windows® 7 Professional operating system
The following web browsers are supported for MotionBuilder 2012:
- Microsoft® Internet Explorer® 7.0 internet browser or higher
- Mozilla® Firefox® 2.0 web browser or higher
Hardware
- Intel® Pentium® processor (minimal)
- Dual Core Processor Workstation or higher (Intel® or AMD® processors) (recommended)
- Qualified hardware-accelerated OpenGL® 2.1 (or higher recommended) professional graphics card with latest graphics driver available on vendor's site
- 2 GB free hard drive space. Setup requires additional temporary disk space for your system's temporary folder when decompressing files during installation.
- 2 GB of RAM minimum and recommended for 32-bit operating systems
- 4 GB of RAM minimum for 64-bit operating systems. 8 GB of RAM recommended.
- Network adaptor with internet connection for licensing (non-internet connected licensing is also supported)
- A DVD drive if installing the software or browsing the media
For the latest list of qualified hardware, including graphics cards, to run MotionBuilder® 2012, refer to the MotionBuilder® 2012 qualification chart located at www.autodesk.com/motionbuilder-hardware.
Autodesk reserves the right to alter product offerings and specifications at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document.
Autodesk is not responsible for errors or failures of Autodesk software arising from the installation of updates, extensions or new releases issued by third party hardware or software vendors for the qualified software or hardware identified in this document (or for any other third party software or hardware that you may use in connection with Autodesk products).

Основные возможности

- Многопоточность и оптимизация
- Соединения симуляций
- Управление позами для объектов
- Отображение в реальном времени и средства работы с анимациями
- Автоматизированное создание оснастки
- Инструменты работы со сценариями
- Динамика жестких скелетов
- Динамическая поддержка устройств

MD5 CRC

Autodesk_MotionBuilder_2012_x32_EN.iso - 86ab95aff21fe1e64b923e144d1ce9ca
Autodesk_MotionBuilder_2012_x64_EN.iso - f4f64e82c28c25b8f6d827974ab8c076

Скриншоты

Установка и активация

[url=viewtopic.php?p=41776891#41776891]On-line руководство[/url] - САПРография rutracker.org